10 Reasons Why Your Heating System Fails to Turn Off
In this blog post we'll explore 10 possible reasons why you might have an issue with shutting down properly and how to fix them!
- The Temperature Is Set Too High
If the temperature is set too high, your heating system will continue to run until it reaches the desired temperature. You can try adjusting the thermostat to a lower temperature and see if that solves the problem.
If your heater continues to run even when the thermostat is set to a lower temperature, it may be due to a problem with your heating system. In this case, you should contact a qualified HVAC technician to inspect or perform heating repair Moore OK if necessary.
- The Temperature Is Set Too Low
On the other hand, if the temperature is set too low, your heating system will also continue to run continuously to reach your home’s desired temperature.
To fix this, try adjusting the thermostat to a higher setting and see if that solves the problem. If it doesn't, you may need to have your heater serviced.
- Faulty Thermostat
Did you check the temperature settings and they seem to be fine? But your heating system still won't shut off? Well, there might be an issue with the thermostat itself! Try replacing the batteries or checking the wiring to see if that fixes the problem. If not, you may need to replace the thermostat entirely.
- Your Unit is Dirty!
A dirty heating system can cause all sorts of problems, including preventing the system from shutting off properly. To clean your heating system, consult your owner's manual or call a professional for help.
- The Heating System is Overheating
An overheated heating system will automatically shut off to prevent damage. However, if the system isn't cooling down properly after shutting off, there could be a problem with the cooling fans or other components. Consult a professional for help diagnosing and heating repair Moore, OK.
- There's a Leak in the Heating System
A leak in the heating system can also cause it to overheat and shut off prematurely. You need to find the leak as soon as possible and contact your local HVAC company for heating repair Moore OK.
- Too Old Heater
An old heating system is more likely to have problems than a newer one. If your heating system is more than 10 years old, it might be time for an upgrade.
- Improperly-Sized Heating System
If your home is too big or too small for your current heating system, it won't work efficiently and could break down prematurely. To ensure that you have a properly sized heating system, consult a professional before making a purchase.
- Incorrectly Installed Insulation
Insulation is essential for your home's heating systems. When insulation becomes damaged or incorrectly installed, it can make the temperature inside of a building colder than expected - which causes high energy consumption and unnecessary wear and tear on appliances.
- There's an Airflow Issue
Poor airflow in your home can make it difficult for heat to circulate properly, leading to longer run times for your heater. Check all your vents and registers to ensure they're open and not blocked by furniture or other objects.
There are many possible reasons why your heating system might not be shutting down properly. By troubleshooting each possibility one by one, you should be able to narrow down the problem and find a solution—whether it’s heating repair Moore OK or simply maintenance.
If you’re dealing with heating issues, don't hesitate to call Triple Play Home Services for help. Give them a call at (405) 283 – 3977 for service!